USED YAMAHA Yamaha / FG-180 Red Label [20]

This is a red label of YAMAHA's famous FG180, which was manufactured around 1968-72.
It has a spruce top, mahogany sides & back, and mahogany neck.
This is a percussive and good sounding instrument, and has a different quality from the high-end models.

* The string height on the 6th string side is a little high, but it is lowered to the limit on the saddle side (12F 2.8mm on the 6th string side, 12F 2.0mm on the 1st string side).
Overall, this item has many scratches, dents, and wood chips.
After our arrival, the biding cracks and wood chips near the body back neck joint have been corrected.
The truss rod is near its limit in the tightening direction.
More than half a century has passed since its manufacture, and there are no problems in playing this item, and you can feel its history.

Item rank: B (average)

Truss rod ： Near the end of tightening
Fretboard: less than 50%.
Accessories: soft case/not genuine
Country of origin: Japan
Weight ： 1.81kg
Serial ： No serial number

Truss Rod : No problem with the neck at the limit of the rod.
Fretboard is not in good condition and needs to be replaced at the time of next repair.
String height (bass string side)|2.8mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|43.3mm
Neck thickness(near 1st fret)|21.8mm
Neck thickness(near 12th fret)|-
SCALE|635mm (25")
RADIUS|381mm (15")
Strings used for setup|D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, string height adjustment, binding repair and mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: There is no problem with the neck at the limit of the rod.

Fret remainder
Defective, need to consider replacing at next repair.

String Height (Bass String Side)
2.8mm above the 12th fret

String height (treble string side)
2.0mm above the 12th fret

Nut width
43.3mm

Neck Thickness (near 1st fret)
21.8mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
635mm (25")

RADIUS
381mm (15")

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, string height adjustment, binding repair and alignment