USED Fender USA Fender / 1978-1980 Mustang White [20]

This is a "Mustang" produced in 1978~1980.
This instrument has been modified to look like a 1965 Mustang.
Originally, it had 3-ply black pickguard and black pickup covers, but it has been replaced with 3-ply tortoiseshell pickguard and white pickup covers.
The pickup date is 1978, and the tone pot is 1978.
The volume pot has been replaced with one from 1980.
The paint is peeling due to scratches and dents, and discoloration, etc. The vintage style is outstanding due to its age.
The ash body is strong and powerful enough for driving, and the output is also sufficient.
The hard case is not the original one, but a Fender tweed case is included.

* After it arrived at our store, it has been cleaned and adjusted as a whole, so it is in good playing condition.
It shows signs of use such as scratches and dings commensurate with its age.
A ground wire has been extended from the body top control to the bridge.

Item rank: B (average)

Year of manufacture: 1978-1980
Truss rod: There is room to spare.
Fretboard: less than 50%.
Accessories ： Hard case / Non-genuine tremolo arm
Country of Origin ： USA
Weight ： 3.87kg
Serial ： S821782

Truss Rod : No problem, confirmed up to 60 degrees to the left and right.
Fret rests are defective and need to be replaced at the next repair.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|40.8mm
Neck thickness(near 1st fret)|23.0mm
Neck thickness (near 12th fret)|25.0mm
SCALE|610mm (24")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret remainder
Defective, need to consider replacing the frets at the next repair

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above the 12th fret

Nut width
40.8mm

Neck Thickness (near 1st fret)
23.0mm

Neck Thickness (near 12th fret)
25.0mm

Scale
610mm (24")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment