USED YAMAHA Yamaha / SG-1300TS Black [20]

The parts are treated with black chrome, which is more expensive than gold, and the controls are simple: 1Vol, 1Tone (bi-sound switch), and 3-way toggle switch.
It is also equipped with the original locking tremolo unit, which makes string changes much easier than Floyd Rose, allows fine string height/octave adjustment for each string, and gives the arm a soft and delicate touch.

* After our arrival, cleaning, overall adjustment (string replacement, rod adjustment, octave adjustment, string height adjustment), and fine tuner screws have been replaced, so it is in good playing condition.
There are noticeable dents with paint cracks on the head corner, back of the neck, and body back, and there are other scratches and small dents overall.

Item rank: B (average)

Year of manufacture: 1984
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine arm
Country of Origin ： JAPAN
Weight ： 4.37kg
Serial ： KXHL010

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.2mm
Neck thickness(near 1st fret)|19.8mm
Neck thickness (near 12th fret)|20.7mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings for setup|D'Addario EXL110 / .010-.046 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.2mm

Neck Thickness (near 1st fret)
19.8mm

Neck Thickness (near 12th fret)
20.7mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment