USED TUNE TUNE / ZST-158 [20]
USED TUNE TUNE / ZST-158 [20]
Item Code: 20-2800002303448
Condition:
USED
Store: [20]
fukuoka
Relation Page:
TUNE x USED x ELECTRIC GUITAR
Regular price
¥72,080 JPY
Regular price
¥75,600 JPY
Sale price
¥72,080 JPY
Unit price
per
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
For customers residing in Japan
This is a high-end model of the Japanese brand that "TUNE" developed in the 1990s.
The body and neck are made of mahogany, the fingerboard is ebony, the body top has avalon inlays, and the bridge and top metal pearl are also engraved.
The pickups are original and are well-balanced humbuckers similar to Duncan in sound quality.
* After our arrival, cleaning, overall adjustment, nut groove correction, and electrical repair have been done, and it is in good playing condition.
The neck is currently rippled, and has been adjusted by mortise and tenon.
The frets are low due to the fret adjustment.
Overall, this guitar has many scratches and dents, and has a strong sense of use.
Item rank: B (average)
Truss rod: There is enough room.
Fret : Less than 50%.
Attachment : Soft case / Non-genuine
Country of origin : Japan
Weight : 4.07kg
Serial : No serial number
Truss Rod : No problem (slight waviness)
Fret remainder: There is a note that it can still withstand cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.4mm
Neck thickness(near 1st fret)|19.1mm
Neck thickness (near 12th fret)|21.3mm
SCALE|624mm (24.56")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, nut adjustment, electrical repair
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs
Truss Rod
No problem (slight waviness).
Fret Remaining
There is a note that the frets are still low enough to withstand cutting.
String height (bass string side)
2.0mm above the 12th fret
String height (treble string side)
1.5mm above 12th fret
Nut width
43.4mm
Neck Thickness (near 1st fret)
19.1mm
Neck Thickness (near 12th fret)
21.3mm
Scale
624mm (24.56")
RADIUS
241mm (9.5")
Strings for setup
ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, nut adjustment, electrical repair
The body and neck are made of mahogany, the fingerboard is ebony, the body top has avalon inlays, and the bridge and top metal pearl are also engraved.
The pickups are original and are well-balanced humbuckers similar to Duncan in sound quality.
* After our arrival, cleaning, overall adjustment, nut groove correction, and electrical repair have been done, and it is in good playing condition.
The neck is currently rippled, and has been adjusted by mortise and tenon.
The frets are low due to the fret adjustment.
Overall, this guitar has many scratches and dents, and has a strong sense of use.
Item rank: B (average)
Truss rod: There is enough room.
Fret : Less than 50%.
Attachment : Soft case / Non-genuine
Country of origin : Japan
Weight : 4.07kg
Serial : No serial number
Truss Rod : No problem (slight waviness)
Fret remainder: There is a note that it can still withstand cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.4mm
Neck thickness(near 1st fret)|19.1mm
Neck thickness (near 12th fret)|21.3mm
SCALE|624mm (24.56")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, nut adjustment, electrical repair
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs
Truss Rod
No problem (slight waviness).
Fret Remaining
There is a note that the frets are still low enough to withstand cutting.
String height (bass string side)
2.0mm above the 12th fret
String height (treble string side)
1.5mm above 12th fret
Nut width
43.4mm
Neck Thickness (near 1st fret)
19.1mm
Neck Thickness (near 12th fret)
21.3mm
Scale
624mm (24.56")
RADIUS
241mm (9.5")
Strings for setup
ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, nut adjustment, electrical repair
90年代に『TUNE』が展開していた国産ブランドの上位モデル。
ボディ、ネックはマホガニー、指板にはエボニー、ボディトップにはアヴァロンインレイ、ブリッジやトップのメタルパールにも彫刻が施されている本家に迫る豪華な仕様です。
ピックアップはオリジナルで、音質的にはダンカンに近いバランスの良いハムバッカーです。
* 弊社入荷後、クリーニング・全体調整・ナット溝修正・電装修理を行っておりプレイコンディションは良好です。
現状ネックに波打ち症状が出ており、すり合わせにて調整を行っております。
すり合わせに伴いフレットが低くなっております。
全体的にキズや打痕等が多く使用感の強い1本です。
商品ランク:B (並品)
トラスロッド : 余裕有り
フレット : 50%以下
付属品 : ソフトケース/非純正
生産国 : JAPAN
重量 : 4.07kg
シリアル : 無し
トラスロッド|注意点ありロッド左右60度まで確認済みにて問題なし(やや波打ち有り)
フレット残り|注意点ありまだ切削に耐えるがフレット低め
弦高(低音弦側)|12フレット上 2.0mm
弦高(高音弦側)|12フレット上 1.5mm
ナット幅|43.4mm
ネック厚(1フレット付近)|19.1mm
ネック厚(12フレット付近)|21.3mm
スケール|624mm (24.56")
RADIUS|241mm (9.5")
セットアップ時の弦|ERNIE BALL 2221 / .010-.046 set
リペア・メンテナンス箇所|クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ・ナット調整・電装修理
* トラスロッド・フレット残り・弦高などは弊社リペアセンターにてセットアップ・調整時でのセッティング数値でございます。
* こちらの商品は現物1点限りでございます。
複数のモールに掲載されているため、売却に伴う商品情報の削除は迅速を心掛けておりますが必ずしもリアルタイムではございませんので、ご注文後に万一売り切れとなっておりました際は誠に申し訳ございませんがご容赦くださいませ。
specs
トラスロッド
注意点ありロッド左右60度まで確認済みにて問題なし(やや波打ち有り)
フレット残り
注意点ありまだ切削に耐えるがフレット低め
弦高(低音弦側)
12フレット上 2.0mm
弦高(高音弦側)
12フレット上 1.5mm
ナット幅
43.4mm
ネック厚(1フレット付近)
19.1mm
ネック厚(12フレット付近)
21.3mm
スケール
624mm (24.56")
RADIUS
241mm (9.5")
セットアップ時の弦
ERNIE BALL 2221 / .010-.046 set
リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ・ナット調整・電装修理
ボディ、ネックはマホガニー、指板にはエボニー、ボディトップにはアヴァロンインレイ、ブリッジやトップのメタルパールにも彫刻が施されている本家に迫る豪華な仕様です。
ピックアップはオリジナルで、音質的にはダンカンに近いバランスの良いハムバッカーです。
* 弊社入荷後、クリーニング・全体調整・ナット溝修正・電装修理を行っておりプレイコンディションは良好です。
現状ネックに波打ち症状が出ており、すり合わせにて調整を行っております。
すり合わせに伴いフレットが低くなっております。
全体的にキズや打痕等が多く使用感の強い1本です。
商品ランク:B (並品)
トラスロッド : 余裕有り
フレット : 50%以下
付属品 : ソフトケース/非純正
生産国 : JAPAN
重量 : 4.07kg
シリアル : 無し
トラスロッド|注意点ありロッド左右60度まで確認済みにて問題なし(やや波打ち有り)
フレット残り|注意点ありまだ切削に耐えるがフレット低め
弦高(低音弦側)|12フレット上 2.0mm
弦高(高音弦側)|12フレット上 1.5mm
ナット幅|43.4mm
ネック厚(1フレット付近)|19.1mm
ネック厚(12フレット付近)|21.3mm
スケール|624mm (24.56")
RADIUS|241mm (9.5")
セットアップ時の弦|ERNIE BALL 2221 / .010-.046 set
リペア・メンテナンス箇所|クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ・ナット調整・電装修理
* トラスロッド・フレット残り・弦高などは弊社リペアセンターにてセットアップ・調整時でのセッティング数値でございます。
* こちらの商品は現物1点限りでございます。
複数のモールに掲載されているため、売却に伴う商品情報の削除は迅速を心掛けておりますが必ずしもリアルタイムではございませんので、ご注文後に万一売り切れとなっておりました際は誠に申し訳ございませんがご容赦くださいませ。
specs
トラスロッド
注意点ありロッド左右60度まで確認済みにて問題なし(やや波打ち有り)
フレット残り
注意点ありまだ切削に耐えるがフレット低め
弦高(低音弦側)
12フレット上 2.0mm
弦高(高音弦側)
12フレット上 1.5mm
ナット幅
43.4mm
ネック厚(1フレット付近)
19.1mm
ネック厚(12フレット付近)
21.3mm
スケール
624mm (24.56")
RADIUS
241mm (9.5")
セットアップ時の弦
ERNIE BALL 2221 / .010-.046 set
リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ・ナット調整・電装修理
Payment and Shiping
Products are shipped from Japan after the order is processed, Shipping costs are calculated automatically at the checkout page when you select your destination. , Ship worldwide by Japan Post.
Founded in 1938, Ishibashi Music Corporation is one of the busiest and most respected Musical Instrument retail chains in Japan. The company is highly regarded world wide as a reliable seller of top quality secondhand items too. We have over 13 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, Hiroshima,Fukuoka and Shanghai(China). Ishibashi Music Corporation also handles large amounts of NEW, USED and VINTAGE instruments.
ABOUT US
Sale
-
USED ORFELD GUITARS / Ellie Korina [06]
Item Code : 06-2800002032300Regular price ¥175,100 JPYRegular priceUnit price per -
USED KILLER / KG-Serpent Galaxy Black [06]
Item Code : 06-2800002067647Regular price ¥57,780 JPYRegular priceUnit price per -
USED FENDER JAPAN / ST62G-65 TRG [06]
Item Code : 06-2800002004505Regular price ¥94,500 JPYRegular priceUnit price per -
USED GIBSON / 1967 EB-0 Cherry [06]
Item Code : 06-2800002092663Regular price ¥247,200 JPYRegular priceUnit price per -
USED MOON / JJ5 ASH WHITE PG [06]
Item Code : 06-2800002050151Regular price ¥175,100 JPYRegular priceUnit price per -
USED Gibson / Limited Edition of 20 J-45HB 2009 [08]
Item Code : 08-2100000691302Regular price ¥433,349 JPYRegular priceUnit price per -
USED ZILDJIAN / Late50s A Small Stamp 18" 1952g Old A Ride Cymbal [08]
Item Code : 08-2100000692040Regular price ¥33,705 JPYRegular priceUnit price per -
USED ZILDJIAN / Trans Stamp 20" Ride 2092g w/Sizzle Hole Old A Zildjian [08]
Item Code : 08-2100000691944Regular price ¥76,602 JPYRegular priceUnit price per -
USED GIBSON / EB-0 [05]
Item Code : 05-2100000691982Regular price ¥209,811 JPYRegular priceUnit price per -
USED FENDER / 1966 PRECISION BASS SUNBURST [05]
Item Code : 05-2100000692026Regular price ¥1,224,000 JPYRegular priceUnit price per