USED YAMAHA Yamaha / SG510 Black [20]
Serial Number : 138512
[SN 138512] USED YAMAHA Yamaha / SG510 Black [20]
Item Code: 20-2800002314512
Condition:
USED
Store: [20]
fukuoka
Relation Page:
YAMAHA x USED x ELECTRIC GUITAR
Regular price
¥72,080 JPY
Regular price
Sale price
¥72,080 JPY
Unit price
per
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
For customers residing in Japan
Yamaha's famous "SG" series was used by top professionals such as Masayoshi Takanaka, Issei Noro, and Carlos Santana.
This SG510 was released in December 1983 and was in the nine-up lineup until around 1986. Although it is the entry model of the series, it is a high-cost performance model with a set neck and archtop construction.
It has a solid agatis wood body and a nato wood neck, and is equipped with an open humbucker using a ferrite magnet, which provides both a reasonable price and a crisp sound.
* After our arrival, it has been cleaned, overall adjusted, fretted, and repaired electrical system, so it is in good playing condition.
There is a ding on the corner of the head that extends to the wood, and other minor scratches and dings throughout.
Item rank: B+ (Good)
Truss rod: There is enough room.
Fret: 60-70%.
Accessories : Soft case / Non-genuine
Country of Origin : Japan
Weight : 3.24kg
Serial : 138512
Truss Rod : No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.0mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|22.5mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Remaining frets
No problem, there is enough fret height.
String height (bass string side)
2.0mm above 12th fret
String height (treble string side)
1.5mm above 12th fret
Nut width
43.0mm
Neck Thickness (near 1st fret)
21.2mm
Neck Thickness (near 12th fret)
22.5mm
Scale
628mm (24.75")
RADIUS
305mm (12")
Strings for setup
ERNIE BALL 2221 / .010-.046 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair
This SG510 was released in December 1983 and was in the nine-up lineup until around 1986. Although it is the entry model of the series, it is a high-cost performance model with a set neck and archtop construction.
It has a solid agatis wood body and a nato wood neck, and is equipped with an open humbucker using a ferrite magnet, which provides both a reasonable price and a crisp sound.
* After our arrival, it has been cleaned, overall adjusted, fretted, and repaired electrical system, so it is in good playing condition.
There is a ding on the corner of the head that extends to the wood, and other minor scratches and dings throughout.
Item rank: B+ (Good)
Truss rod: There is enough room.
Fret: 60-70%.
Accessories : Soft case / Non-genuine
Country of Origin : Japan
Weight : 3.24kg
Serial : 138512
Truss Rod : No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.0mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|22.5mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Remaining frets
No problem, there is enough fret height.
String height (bass string side)
2.0mm above 12th fret
String height (treble string side)
1.5mm above 12th fret
Nut width
43.0mm
Neck Thickness (near 1st fret)
21.2mm
Neck Thickness (near 12th fret)
22.5mm
Scale
628mm (24.75")
RADIUS
305mm (12")
Strings for setup
ERNIE BALL 2221 / .010-.046 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair
高中正義、野呂一生、カルロス・サンタナなどトップ・プロに愛用されたヤマハの銘機「SG」シリーズ。
本機は1983年12月に発売され86年頃までナインナップされたSG510で、シリーズ末弟のエントリーモデルながらセットネック構造やアーチトップ構造を採用したハイコストパフォーマンスモデルです。
アガチス材のソリッドボディにナトー材のネックを採用し、フェライトマグネットを使用したオープンハムバッカーを搭載することで、リーズナブルなプライスと切れの良いサウンドを両立。
* 弊社入荷後、クリーニング・全体調整・フレットすり合わせ・電装系修理を行っておりますので、プレイコンディション良好です。
ヘッド角に木部まで達している打痕があり、その他全体的に細かいスリキズや小さな打痕などはございます。
商品ランク:B+ (良品)
トラスロッド : 余裕有り
フレット : 60~70%
付属品 : ソフトケース/非純正
生産国 : JAPAN
重量 : 3.24kg
シリアル : 138512
トラスロッド|問題なしロッド左右60度まで確認済みにて問題なし
フレット残り|問題なし充分なフレット高さあり
弦高(低音弦側)|12フレット上 2.0mm
弦高(高音弦側)|12フレット上 1.5mm
ナット幅|43.0mm
ネック厚(1フレット付近)|21.2mm
ネック厚(12フレット付近)|22.5mm
スケール|628mm (24.75")
RADIUS|305mm (12")
セットアップ時の弦|ERNIE BALL 2221 / .010-.046 set
リペア・メンテナンス箇所|クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ・電装修理
* トラスロッド・フレット残り・弦高などは弊社リペアセンターにてセットアップ・調整時でのセッティング数値でございます。
* こちらの商品は現物1点限りでございます。
複数のモールに掲載されているため、売却に伴う商品情報の削除は迅速を心掛けておりますが必ずしもリアルタイムではございませんので、ご注文後に万一売り切れとなっておりました際は誠に申し訳ございませんがご容赦くださいませ。
specs
トラスロッド
問題なしロッド左右60度まで確認済みにて問題なし
フレット残り
問題なし充分なフレット高さあり
弦高(低音弦側)
12フレット上 2.0mm
弦高(高音弦側)
12フレット上 1.5mm
ナット幅
43.0mm
ネック厚(1フレット付近)
21.2mm
ネック厚(12フレット付近)
22.5mm
スケール
628mm (24.75")
RADIUS
305mm (12")
セットアップ時の弦
ERNIE BALL 2221 / .010-.046 set
リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ・電装修理
本機は1983年12月に発売され86年頃までナインナップされたSG510で、シリーズ末弟のエントリーモデルながらセットネック構造やアーチトップ構造を採用したハイコストパフォーマンスモデルです。
アガチス材のソリッドボディにナトー材のネックを採用し、フェライトマグネットを使用したオープンハムバッカーを搭載することで、リーズナブルなプライスと切れの良いサウンドを両立。
* 弊社入荷後、クリーニング・全体調整・フレットすり合わせ・電装系修理を行っておりますので、プレイコンディション良好です。
ヘッド角に木部まで達している打痕があり、その他全体的に細かいスリキズや小さな打痕などはございます。
商品ランク:B+ (良品)
トラスロッド : 余裕有り
フレット : 60~70%
付属品 : ソフトケース/非純正
生産国 : JAPAN
重量 : 3.24kg
シリアル : 138512
トラスロッド|問題なしロッド左右60度まで確認済みにて問題なし
フレット残り|問題なし充分なフレット高さあり
弦高(低音弦側)|12フレット上 2.0mm
弦高(高音弦側)|12フレット上 1.5mm
ナット幅|43.0mm
ネック厚(1フレット付近)|21.2mm
ネック厚(12フレット付近)|22.5mm
スケール|628mm (24.75")
RADIUS|305mm (12")
セットアップ時の弦|ERNIE BALL 2221 / .010-.046 set
リペア・メンテナンス箇所|クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ・電装修理
* トラスロッド・フレット残り・弦高などは弊社リペアセンターにてセットアップ・調整時でのセッティング数値でございます。
* こちらの商品は現物1点限りでございます。
複数のモールに掲載されているため、売却に伴う商品情報の削除は迅速を心掛けておりますが必ずしもリアルタイムではございませんので、ご注文後に万一売り切れとなっておりました際は誠に申し訳ございませんがご容赦くださいませ。
specs
トラスロッド
問題なしロッド左右60度まで確認済みにて問題なし
フレット残り
問題なし充分なフレット高さあり
弦高(低音弦側)
12フレット上 2.0mm
弦高(高音弦側)
12フレット上 1.5mm
ナット幅
43.0mm
ネック厚(1フレット付近)
21.2mm
ネック厚(12フレット付近)
22.5mm
スケール
628mm (24.75")
RADIUS
305mm (12")
セットアップ時の弦
ERNIE BALL 2221 / .010-.046 set
リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ・電装修理
Payment and Shiping
Products are shipped from Japan after the order is processed, Shipping costs are calculated automatically at the checkout page when you select your destination. , Ship worldwide by Japan Post.
Founded in 1938, Ishibashi Music Corporation is one of the busiest and most respected Musical Instrument retail chains in Japan. The company is highly regarded world wide as a reliable seller of top quality secondhand items too. We have over 13 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, Hiroshima,Fukuoka and Shanghai(China). Ishibashi Music Corporation also handles large amounts of NEW, USED and VINTAGE instruments.
ABOUT US
Sale
-
USED ORFELD GUITARS / Ellie Korina [06]
Item Code : 06-2800002032300Regular price ¥175,100 JPYRegular priceUnit price per -
USED KILLER / KG-Serpent Galaxy Black [06]
Item Code : 06-2800002067647Regular price ¥57,780 JPYRegular priceUnit price per -
USED FENDER JAPAN / ST62G-65 TRG [06]
Item Code : 06-2800002004505Regular price ¥94,500 JPYRegular priceUnit price per -
USED GIBSON / 1967 EB-0 Cherry [06]
Item Code : 06-2800002092663Regular price ¥247,200 JPYRegular priceUnit price per -
USED MOON / JJ5 ASH WHITE PG [06]
Item Code : 06-2800002050151Regular price ¥175,100 JPYRegular priceUnit price per -
USED Gibson / Limited Edition of 20 J-45HB 2009 [08]
Item Code : 08-2100000691302Regular price ¥433,349 JPYRegular priceUnit price per -
USED ZILDJIAN / Late50s A Small Stamp 18" 1952g Old A Ride Cymbal [08]
Item Code : 08-2100000692040Regular price ¥33,705 JPYRegular priceUnit price per -
USED ZILDJIAN / Trans Stamp 20" Ride 2092g w/Sizzle Hole Old A Zildjian [08]
Item Code : 08-2100000691944Regular price ¥76,602 JPYRegular priceUnit price per -
USED GIBSON / EB-0 [05]
Item Code : 05-2100000691982Regular price ¥209,811 JPYRegular priceUnit price per -
USED FENDER / 1966 PRECISION BASS SUNBURST [05]
Item Code : 05-2100000692026Regular price ¥1,224,000 JPYRegular priceUnit price per