USED Fender Japan Fender Japan / TL67-80SPL 3ToneSunburst [20]

This TL67-80SPL is a traditional Telecaster with an ash body and maple neck, but with a humgucker on the front, reminiscent of a certain famous artist's Telegib.
The bridge is a 6-way with a brass base and brass saddles.

* After our arrival, cleaning, overall adjustment (string replacement, rod adjustment, octave adjustment, string height adjustment), electrical repair, and nut adjustment have been done.
The neck has some rippling symptoms and has been shimmed and adjusted.
The frets are low due to the fret adjustment.
The guitar is in good playing condition after the above adjustments.
The strap pin has been replaced, and there are scratches and minor dings due to age.
There are some parts that have some spots and greenish-blue etc.

Item rank: B+ (Good)

Year of manufacture: 1993-1994
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Genuine
Country of Origin ： Japan
Weight ： 3.61kg
Serial ： CIJ O004331

Truss Rod: No problem, confirmed up to 60 degrees to the left and right (with waviness)
Fret remainder: There is a note that it can still withstand cutting, but the frets are low.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.1mm
Neck thickness(near 1st fret)|20.3mm
Neck thickness (near 12th fret)|22.6mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair, nut adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret Remaining
There is a note that the frets are still low enough to withstand cutting.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
42.1mm

Neck Thickness (near 1st fret)
20.3mm

Neck Thickness (near 12th fret)
22.6mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair, nut adjustment