USED Provision Provision / OSL-KK001 Custom Order Model 3TS [20]
Serial Number : 07013005
[SN 07013005] USED Provision Provision / OSL-KK001 Custom Order Model 3TS [20]
Item Code: 20-2800002365729
Condition:
USED
Store: [20]
fukuoka
Relation Page:
PROVISION x USED x ELECTRIC GUITAR
Regular price
¥185,400 JPY
Regular price
¥206,000 JPY
Sale price
¥185,400 JPY
Unit price
per
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
For customers residing in Japan
Provision Guitars, a guitar studio in Yamaguchi Prefecture, has been gaining popularity in recent years as a purveyor to famous artists.
This is an N4 specification order model.
Lightweight 2P ash body, 3-piece AA frayed maple neck, ebony fingerboard, jumbo frets, and head angle are the same as N4.
Unlike the original, the N4 has a detachable structure with heel-less processing instead of a stephan joint, and the bridge is a stop tailpiece.
The bridge is also a stop tailpiece. This makes it lighter than the original and allows easy access to the high frets.
The pickups are the same set as the original with SH-1N & L-500.
* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, rubbed together, and electrical repairs have been done, so it is in good playing condition.
There are some minor scratches and dents, but there are no noticeable flaws such as paint cracks, etc., and it is in good condition.
Item rank: B+ (Good)
Truss rod: There is room to spare.
Fretboard: 60-70%.
Accessories: Semi-hard case/non-genuine lock pin, order sheet
Country of Origin : JAPAN
Weight : 2.83kg
Serial : 07013005
Truss Rod : No problem, confirmed to 60 degrees left and right
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.3mm
Neck thickness(near 1st fret)|20.7mm
Neck thickness (near 12th fret)|23.0mm
SCALE|648mm (25.5")
RADIUS|400mm (15.74")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Remaining frets
No problem, there is enough fret height.
String height (bass string side)
2.0mm above 12th fret
String height (treble string side)
1.5mm above 12th fret
Nut Width
42.3mm
Neck Thickness (near 1st fret)
20.7mm
Neck Thickness (near 12th fret)
23.0mm
Scale
648mm (25.5")
RADIUS
400mm (15.74")
Strings for setup
ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair
This is an N4 specification order model.
Lightweight 2P ash body, 3-piece AA frayed maple neck, ebony fingerboard, jumbo frets, and head angle are the same as N4.
Unlike the original, the N4 has a detachable structure with heel-less processing instead of a stephan joint, and the bridge is a stop tailpiece.
The bridge is also a stop tailpiece. This makes it lighter than the original and allows easy access to the high frets.
The pickups are the same set as the original with SH-1N & L-500.
* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, rubbed together, and electrical repairs have been done, so it is in good playing condition.
There are some minor scratches and dents, but there are no noticeable flaws such as paint cracks, etc., and it is in good condition.
Item rank: B+ (Good)
Truss rod: There is room to spare.
Fretboard: 60-70%.
Accessories: Semi-hard case/non-genuine lock pin, order sheet
Country of Origin : JAPAN
Weight : 2.83kg
Serial : 07013005
Truss Rod : No problem, confirmed to 60 degrees left and right
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.3mm
Neck thickness(near 1st fret)|20.7mm
Neck thickness (near 12th fret)|23.0mm
SCALE|648mm (25.5")
RADIUS|400mm (15.74")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Remaining frets
No problem, there is enough fret height.
String height (bass string side)
2.0mm above 12th fret
String height (treble string side)
1.5mm above 12th fret
Nut Width
42.3mm
Neck Thickness (near 1st fret)
20.7mm
Neck Thickness (near 12th fret)
23.0mm
Scale
648mm (25.5")
RADIUS
400mm (15.74")
Strings for setup
ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair
有名アーティスト御用達で近年人気が急上昇している、山口県ギター工房プロビジョンギター。
こちらはN4仕様オーダーモデルとなっております。
ライトウェイト2Pアッシュボディ、AAフレイメイプル3ピースネック、エボニー指板、ジャンボフレット、ヘッド角度もN4同様となっております。
本家とは違い、ステファン・ジョイントではなくヒールレス加工が入ったデタッチャブル構造となっており、ブリッジもストップテイルピース仕様となっております。
これにより本家よりも軽量でハイフレットのアクセスも容易となっております。
ピックアップはSH-1N&L-500と本家と同じセットになっております。
* 弊社入荷後、クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ・電装修理を行っておりますので、プレイコンディション良好です。
細かいキズや打痕等はございますが、塗装割れなどの目立つキズはなく状態良好です。
商品ランク:B+ (良品)
トラスロッド : 余裕有り
フレット : 60~70%
付属品 : セミハードケース/非純正 ロックピン・オーダーシート
生産国 : JAPAN
重量 : 2.83kg
シリアル : 07013005
トラスロッド|問題なしロッド左右60度まで確認済みにて問題なし
フレット残り|問題なし充分なフレット高さあり
弦高(低音弦側)|12フレット上 2.0mm
弦高(高音弦側)|12フレット上 1.5mm
ナット幅|42.3mm
ネック厚(1フレット付近)|20.7mm
ネック厚(12フレット付近)|23.0mm
スケール|648mm (25.5")
RADIUS|400mm (15.74")
セットアップ時の弦|ERNIE BALL 2223 / .009-.042 set
リペア・メンテナンス箇所|クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ・電装修理
* トラスロッド・フレット残り・弦高などは弊社リペアセンターにてセットアップ・調整時でのセッティング数値でございます。
* こちらの商品は現物1点限りでございます。
複数のモールに掲載されているため、売却に伴う商品情報の削除は迅速を心掛けておりますが必ずしもリアルタイムではございませんので、ご注文後に万一売り切れとなっておりました際は誠に申し訳ございませんがご容赦くださいませ。
specs
トラスロッド
問題なしロッド左右60度まで確認済みにて問題なし
フレット残り
問題なし充分なフレット高さあり
弦高(低音弦側)
12フレット上 2.0mm
弦高(高音弦側)
12フレット上 1.5mm
ナット幅
42.3mm
ネック厚(1フレット付近)
20.7mm
ネック厚(12フレット付近)
23.0mm
スケール
648mm (25.5")
RADIUS
400mm (15.74")
セットアップ時の弦
ERNIE BALL 2223 / .009-.042 set
リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ・電装修理
こちらはN4仕様オーダーモデルとなっております。
ライトウェイト2Pアッシュボディ、AAフレイメイプル3ピースネック、エボニー指板、ジャンボフレット、ヘッド角度もN4同様となっております。
本家とは違い、ステファン・ジョイントではなくヒールレス加工が入ったデタッチャブル構造となっており、ブリッジもストップテイルピース仕様となっております。
これにより本家よりも軽量でハイフレットのアクセスも容易となっております。
ピックアップはSH-1N&L-500と本家と同じセットになっております。
* 弊社入荷後、クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ・電装修理を行っておりますので、プレイコンディション良好です。
細かいキズや打痕等はございますが、塗装割れなどの目立つキズはなく状態良好です。
商品ランク:B+ (良品)
トラスロッド : 余裕有り
フレット : 60~70%
付属品 : セミハードケース/非純正 ロックピン・オーダーシート
生産国 : JAPAN
重量 : 2.83kg
シリアル : 07013005
トラスロッド|問題なしロッド左右60度まで確認済みにて問題なし
フレット残り|問題なし充分なフレット高さあり
弦高(低音弦側)|12フレット上 2.0mm
弦高(高音弦側)|12フレット上 1.5mm
ナット幅|42.3mm
ネック厚(1フレット付近)|20.7mm
ネック厚(12フレット付近)|23.0mm
スケール|648mm (25.5")
RADIUS|400mm (15.74")
セットアップ時の弦|ERNIE BALL 2223 / .009-.042 set
リペア・メンテナンス箇所|クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ・電装修理
* トラスロッド・フレット残り・弦高などは弊社リペアセンターにてセットアップ・調整時でのセッティング数値でございます。
* こちらの商品は現物1点限りでございます。
複数のモールに掲載されているため、売却に伴う商品情報の削除は迅速を心掛けておりますが必ずしもリアルタイムではございませんので、ご注文後に万一売り切れとなっておりました際は誠に申し訳ございませんがご容赦くださいませ。
specs
トラスロッド
問題なしロッド左右60度まで確認済みにて問題なし
フレット残り
問題なし充分なフレット高さあり
弦高(低音弦側)
12フレット上 2.0mm
弦高(高音弦側)
12フレット上 1.5mm
ナット幅
42.3mm
ネック厚(1フレット付近)
20.7mm
ネック厚(12フレット付近)
23.0mm
スケール
648mm (25.5")
RADIUS
400mm (15.74")
セットアップ時の弦
ERNIE BALL 2223 / .009-.042 set
リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ・電装修理
Payment and Shiping
Products are shipped from Japan after the order is processed, Shipping costs are calculated automatically at the checkout page when you select your destination. , Ship worldwide by Japan Post.
Founded in 1938, Ishibashi Music Corporation is one of the busiest and most respected Musical Instrument retail chains in Japan. The company is highly regarded world wide as a reliable seller of top quality secondhand items too. We have over 13 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, Hiroshima,Fukuoka and Shanghai(China). Ishibashi Music Corporation also handles large amounts of NEW, USED and VINTAGE instruments.
ABOUT US
Sale
-
USED ORFELD GUITARS / Ellie Korina [06]
Item Code : 06-2800002032300Regular price ¥175,100 JPYRegular priceUnit price per -
USED KILLER / KG-Serpent Galaxy Black [06]
Item Code : 06-2800002067647Regular price ¥57,780 JPYRegular priceUnit price per -
USED FENDER JAPAN / ST62G-65 TRG [06]
Item Code : 06-2800002004505Regular price ¥94,500 JPYRegular priceUnit price per -
USED GIBSON / 1967 EB-0 Cherry [06]
Item Code : 06-2800002092663Regular price ¥247,200 JPYRegular priceUnit price per -
USED MOON / JJ5 ASH WHITE PG [06]
Item Code : 06-2800002050151Regular price ¥175,100 JPYRegular priceUnit price per -
USED Gibson / Limited Edition of 20 J-45HB 2009 [08]
Item Code : 08-2100000691302Regular price ¥433,349 JPYRegular priceUnit price per -
USED ZILDJIAN / Late50s A Small Stamp 18" 1952g Old A Ride Cymbal [08]
Item Code : 08-2100000692040Regular price ¥33,705 JPYRegular priceUnit price per -
USED ZILDJIAN / Trans Stamp 20" Ride 2092g w/Sizzle Hole Old A Zildjian [08]
Item Code : 08-2100000691944Regular price ¥76,602 JPYRegular priceUnit price per -
USED GIBSON / EB-0 [05]
Item Code : 05-2100000691982Regular price ¥209,811 JPYRegular priceUnit price per -
USED FENDER / 1966 PRECISION BASS SUNBURST [05]
Item Code : 05-2100000692026Regular price ¥1,224,000 JPYRegular priceUnit price per