USED K.yairi K.yairi / RAG-2 Custom [20]
Serial Number : 30972
[SN 30972] USED K.yairi K.yairi / RAG-2 Custom [20]
Item Code: 20-2800002372871
Condition:
USED
Store: [20]
fukuoka
Relation Page:
K.YAIRI x USED x ACOUSTIC GUITAR
Regular price
¥122,720 JPY
Regular price
Sale price
¥122,720 JPY
Unit price
per
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
For customers residing in Japan
This is a "RAG-2 Custom" made in 1997 by K.yairi, a purely domestic brand produced at the factory in Gifu Prefecture, Japan.
This is a custom model with nylon strings instead of the usual iron string finish.
Spruce top, mahogany sides and back, rosewood fingerboard, slotted head, 12-fret joint.
This is a modern design with the bass side fingerboard cut from around the 14th fret to the end of the fingerboard.
The small form of this popular RAG is few on the market, and the all veneer makes it a classic guitar that is easy to handle.
* After our arrival, it has been cleaned, overall adjusted (string replacement, rod adjustment, octave adjustment, string height adjustment), and deburred, so it is in good playing condition.
There are a few dents on the top of the body, but other than that, it is in good condition with only minor scratches.
Item rank: B+ (Good)
Year of manufacture: 1997
Truss Rod : Nearly fully tightened
Fretboard: 60-70% full
Accessories: Hard Case / Non-Genuine
Country of Origin : Japan
Weight : 1.36kg
Serial : 30972
Truss Rod : No problem, confirmed up to 60 degrees left and right (not much left)
Fret height is sufficient.
String height(bass string side)|4.0mm above 12th fret
String height(treble string side)|3.0mm above 12th fret
Nut width|43.8mm
Neck thickness(near 1st fret)|20.9mm
Neck thickness(near 12th fret)|-
Scale|-628mm (24.75")
RADIUS|-
Strings at setup|MATSUOKA MC1000HT / High Tension
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, deburring
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs
Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right (not much left).
Remaining frets
No problem, there is enough fret height.
String height (bass string side)
4.0mm above the 12th fret
String height (treble string side)
3.0mm above 12th fret
Nut width
43.8mm
Neck Thickness (near 1st fret)
20.9mm
Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)
Scale
628mm (24.75")
RADIUS
-RADIUS
Strings for setup
MATSUOKA MC1000HT / High Tension
Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, deburring
This is a custom model with nylon strings instead of the usual iron string finish.
Spruce top, mahogany sides and back, rosewood fingerboard, slotted head, 12-fret joint.
This is a modern design with the bass side fingerboard cut from around the 14th fret to the end of the fingerboard.
The small form of this popular RAG is few on the market, and the all veneer makes it a classic guitar that is easy to handle.
* After our arrival, it has been cleaned, overall adjusted (string replacement, rod adjustment, octave adjustment, string height adjustment), and deburred, so it is in good playing condition.
There are a few dents on the top of the body, but other than that, it is in good condition with only minor scratches.
Item rank: B+ (Good)
Year of manufacture: 1997
Truss Rod : Nearly fully tightened
Fretboard: 60-70% full
Accessories: Hard Case / Non-Genuine
Country of Origin : Japan
Weight : 1.36kg
Serial : 30972
Truss Rod : No problem, confirmed up to 60 degrees left and right (not much left)
Fret height is sufficient.
String height(bass string side)|4.0mm above 12th fret
String height(treble string side)|3.0mm above 12th fret
Nut width|43.8mm
Neck thickness(near 1st fret)|20.9mm
Neck thickness(near 12th fret)|-
Scale|-628mm (24.75")
RADIUS|-
Strings at setup|MATSUOKA MC1000HT / High Tension
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, deburring
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs
Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right (not much left).
Remaining frets
No problem, there is enough fret height.
String height (bass string side)
4.0mm above the 12th fret
String height (treble string side)
3.0mm above 12th fret
Nut width
43.8mm
Neck Thickness (near 1st fret)
20.9mm
Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)
Scale
628mm (24.75")
RADIUS
-RADIUS
Strings for setup
MATSUOKA MC1000HT / High Tension
Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, deburring
岐阜県の工場にて生産される純国産ブランド K.yairiの「RAG-2 Custom」1997年製です。
通常の鉄鉉仕様ではなくナイロン弦仕様へ変更されたカスタムモデルです。
スプルーストップ、マホガニーサイド&バック、ローズウッド指板、スロッテッドヘッド、12フレットジョイント。
14フレット付近から指板エンドにかけて低音側指板がカットされたモダンなデザインの1本です。
小ぶりなフォルムが人気のRAGは市場にも少なく、オール単板で取り回しの良いクラシックギターです。
* 弊社入荷後、クリーニング・全体調整(弦交換・ロッド調整・オクターブ調整・弦高調整)・バリ取りを行っておりますので、プレイコンディション良好です。
ボディトップに数か所打痕がございますが、その他細かいキズ程度で状態良好です。
商品ランク:B+ (良品)
製造年 : 1997年製
トラスロッド : 締まり切り近い
フレット : 60~70%
付属品 : ハードケース/非純正
生産国 : Japan
重量 : 1.36kg
シリアル : 30972
トラスロッド|注意点ありロッド左右60度まで確認済みにて問題なし(残り少なめ)
フレット残り|問題なし充分なフレット高さあり
弦高(低音弦側)|12フレット上 4.0mm
弦高(高音弦側)|12フレット上 3.0mm
ナット幅|43.8mm
ネック厚(1フレット付近)|20.9mm
ネック厚(12フレット付近)|-
スケール|628mm (24.75")
RADIUS|-
セットアップ時の弦|MATSUOKA MC1000HT / High Tension
リペア・メンテナンス箇所|クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・バリ取り
* トラスロッド・フレット残り・弦高などは弊社リペアセンターにてセットアップ・調整時でのセッティング数値でございます。
* こちらの商品は現物1点限りでございます。
複数のモールに掲載されているため、売却に伴う商品情報の削除は迅速を心掛けておりますが必ずしもリアルタイムではございませんので、ご注文後に万一売り切れとなっておりました際は誠に申し訳ございませんがご容赦くださいませ。
specs
トラスロッド
注意点ありロッド左右60度まで確認済みにて問題なし(残り少なめ)
フレット残り
問題なし充分なフレット高さあり
弦高(低音弦側)
12フレット上 4.0mm
弦高(高音弦側)
12フレット上 3.0mm
ナット幅
43.8mm
ネック厚(1フレット付近)
20.9mm
ネック厚(12フレット付近)
-
スケール
628mm (24.75")
RADIUS
-
セットアップ時の弦
MATSUOKA MC1000HT / High Tension
リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・バリ取り
通常の鉄鉉仕様ではなくナイロン弦仕様へ変更されたカスタムモデルです。
スプルーストップ、マホガニーサイド&バック、ローズウッド指板、スロッテッドヘッド、12フレットジョイント。
14フレット付近から指板エンドにかけて低音側指板がカットされたモダンなデザインの1本です。
小ぶりなフォルムが人気のRAGは市場にも少なく、オール単板で取り回しの良いクラシックギターです。
* 弊社入荷後、クリーニング・全体調整(弦交換・ロッド調整・オクターブ調整・弦高調整)・バリ取りを行っておりますので、プレイコンディション良好です。
ボディトップに数か所打痕がございますが、その他細かいキズ程度で状態良好です。
商品ランク:B+ (良品)
製造年 : 1997年製
トラスロッド : 締まり切り近い
フレット : 60~70%
付属品 : ハードケース/非純正
生産国 : Japan
重量 : 1.36kg
シリアル : 30972
トラスロッド|注意点ありロッド左右60度まで確認済みにて問題なし(残り少なめ)
フレット残り|問題なし充分なフレット高さあり
弦高(低音弦側)|12フレット上 4.0mm
弦高(高音弦側)|12フレット上 3.0mm
ナット幅|43.8mm
ネック厚(1フレット付近)|20.9mm
ネック厚(12フレット付近)|-
スケール|628mm (24.75")
RADIUS|-
セットアップ時の弦|MATSUOKA MC1000HT / High Tension
リペア・メンテナンス箇所|クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・バリ取り
* トラスロッド・フレット残り・弦高などは弊社リペアセンターにてセットアップ・調整時でのセッティング数値でございます。
* こちらの商品は現物1点限りでございます。
複数のモールに掲載されているため、売却に伴う商品情報の削除は迅速を心掛けておりますが必ずしもリアルタイムではございませんので、ご注文後に万一売り切れとなっておりました際は誠に申し訳ございませんがご容赦くださいませ。
specs
トラスロッド
注意点ありロッド左右60度まで確認済みにて問題なし(残り少なめ)
フレット残り
問題なし充分なフレット高さあり
弦高(低音弦側)
12フレット上 4.0mm
弦高(高音弦側)
12フレット上 3.0mm
ナット幅
43.8mm
ネック厚(1フレット付近)
20.9mm
ネック厚(12フレット付近)
-
スケール
628mm (24.75")
RADIUS
-
セットアップ時の弦
MATSUOKA MC1000HT / High Tension
リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・バリ取り
Payment and Shiping
Products are shipped from Japan after the order is processed, Shipping costs are calculated automatically at the checkout page when you select your destination. , Ship worldwide by Japan Post.
Founded in 1938, Ishibashi Music Corporation is one of the busiest and most respected Musical Instrument retail chains in Japan. The company is highly regarded world wide as a reliable seller of top quality secondhand items too. We have over 13 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, Hiroshima,Fukuoka and Shanghai(China). Ishibashi Music Corporation also handles large amounts of NEW, USED and VINTAGE instruments.
ABOUT US
Sale
-
USED ZILDJIAN / Late50s A Small Stamp 18" 1952g Old A Ride Cymbal [08]
Item Code : 08-2100000692040Regular price ¥33,705 JPYRegular priceUnit price per -
USED ZILDJIAN / Trans Stamp 20" Ride 2092g w/Sizzle Hole Old A Zildjian [08]
Item Code : 08-2100000691944Regular price ¥76,602 JPYRegular priceUnit price per -
USED ZILDJIAN / A Trans Stamp 22" Ride 2762g Old A Zildjian Ride Cymbal [08]
Item Code : 08-2100000691951Regular price ¥96,122 JPYRegular priceUnit price per -
USED GIBSON / EB-0 [05]
Item Code : 05-2100000691982Regular price ¥209,811 JPYRegular priceUnit price per -
USED FENDER / 1966 PRECISION BASS SUNBURST [05]
Item Code : 05-2100000692026Regular price ¥1,224,000 JPYRegular priceUnit price per -
USED GIBSON / 1965 Firebird V Non-Reverse Deluxe Vibrato [05]
Item Code : 05-2100000691890Regular price ¥1,020,000 JPYRegular priceUnit price per -
USED Fender Custom Shop / 1956 Stratocaster Closet Classic Black 2000 [09]
Item Code : 09-2100000691371Regular price ¥351,760 JPYRegular priceUnit price per -
USED yamaha / ljx26ccy [10]
Item Code : 10-2800002425263Regular price ¥366,087 JPYRegular priceUnit price per -
USED FENDER JAPAN / JB75-80 Natural 1984-1987 [10]
Item Code : 10-2800002407450Regular price ¥157,308 JPYRegular priceUnit price per -
USED LAKE WOOD / M-32 CP [10]
Item Code : 10-2800002425256Regular price ¥366,087 JPYRegular priceUnit price per