USED Hamer Hamer / SLAMMER SERIES SAT Black [20]

Double cutaway model SAT by HAMER, made in Korea, was released in the late 1990s.
Maple top, mahogany back, mahogany/rose neck, and two Duncan-designed humbucking PUs.
The small horn, large bulging arch top, and large head shave are all features of the USA-made Haymer.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and electrical repair have been done.
The neck has a high spring, and it has been adjusted by fret adjustment.
The frets have been lowered considerably and the string height on the first string side has been raised a little.

The pegs and parts are dull and rusted.
There are some minor scratches and dents.

Item rank: B (average)

Truss rod: There is enough room.
Fretboard : Less than 50%.
Accessories : Gig bag / Non-genuine
Country of Origin ： KOREA
Weight ： 3.52kg
Serial ： 6081331

Truss Rod : No problem, confirmed up to 60 degrees to the left and right.
Fret remainder is defective and needs to be replaced when it is repaired next time.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.8mm above 12th fret
Nut width|43.4mm
Neck thickness(near 1st fret)|20.7mm
Neck thickness (near 12th fret)|22.1mm
SCALE|628mm (24.75")
RADIUS|356mm (14")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret remainder
Defective, need to consider replacing at next repair.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.8mm above the 12th fret

Nut width
43.4mm

Neck Thickness (near 1st fret)
20.7mm

Neck Thickness (near 12th fret)
22.1mm

Scale
628mm (24.75")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair