USED Bossa Bossa / OBJ-5E Modified Orange Burst [20]

This is a 5-string bass by Bossa, a domestic manufacturer that is no longer in production.
This is a high quality bass with a combination of highly original shape and robust neck, which is typical of Japanese-made basses.
This bass has a particularly high reputation for its multi-string bass, and its ability is supported by overseas gospel bassists for whom 5-string and 6-string basses are the standard.
This OBJ is originally an active bass, but has been modified to be a passive bass.
It has been converted to 2VOL and 3TONE, and the tone circuit can be turned on and off with a mini switch.
The preamp has been removed and the battery box is a dummy.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised, so it is in good playing condition.
There is a ding with paint cracking around the endpin, and the back of the neck is darkened.
There are other signs of use such as scratches and minor dents.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fretboard: 60% to 70%.
Accessories: Soft case/not genuine
Country of origin: Japan
Weight ： 4.05kg
Serial ： 190101

Truss Rod : No problem, rod is 60 degrees to the left and right.
Fret height is sufficient.
String height(bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|45.6mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|23.2mm
SCALE|864mm (34")
RADIUS|356mm (14")
Strings for setup|D'Addario EXL165+XLB135T / .045-.135 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.5mm above 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
45.6mm

Neck Thickness (near 1st fret)
21.2mm

Neck Thickness (near 12th fret)
23.2mm

Scale
864mm (34")

RADIUS
356mm (14")

Strings for setup
D'Addario EXL165+XLB135T / .045-.135 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing