USED Fender USA Fender / 40th Anniversary 1954 Stratocaster [20]

To commemorate the 40th anniversary of the Stratocaster, Fender released this anniversary model in 1994 in a limited edition of 1954.
This is one of the few models featuring the 1954 Strat, and features an ash body and a poodle-shaped hard case specification.
Unfortunately, the bridge cover and documents are missing, but the burnt lacquer of nearly 30 years after its manufacture gives it a more vintage look.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, grated, nut groove corrected, and pot cleaned, so it is in good playing condition.

There are some paint burns, minor scratches, and small dents, but no noticeable flaws.

Item rank: B+ (Good)

Year of manufacture: 1994
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Hard case / Genuine arm
Country of Origin ： USA
Weight ： 3.41kg
Serial ： 1283 OF 1954

Truss Rod : No problem, rod is confirmed to be 60 degrees to the left and right.
Fretboard: Still good for cutting, but the frets are low.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.2mm
Neck thickness(near 1st fret)|21.8mm
Neck thickness (near 12th fret)|24.7mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and groove adjustment, nut groove correction, pot cleaning

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fretboard Remaining
Note that the frets are low and can still withstand cutting.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
42.2mm

Neck Thickness (near 1st fret)
21.8mm

Neck Thickness (near 12th fret)
24.7mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, nut groove correction, pot cleaning