USED YAMAHA Yamaha / MG-MII Blue Sunburst [20]

The H-S-H pickup arrangement allows for an all-round sound.
This guitar has been used by B'z since their debut (MG-M at the time of their debut), so it contains Takahiro Matsumoto's musical spirit.
The fat and taut sound with distortion is particularly impressive, but the halftone sound with clean tone is also quite practical and good.

* After our arrival, the guitar has been cleaned, strings replaced, rods adjusted, octave adjusted, string height adjusted, and mortised.
The wood at the neck pocket end is cracked, so glue has been injected through the gap to stop it from splitting.
Due to a crack in the wood near the stud on the first string side, a dowel has been inserted across the crack to reinforce the crack, which is not visible from the outside.

The fingerboard is stained and there are scratches and dents throughout.

Item rank: B (average)

Truss Rod ： Tightened
Fretboard: 60-70%.
Accessories: Soft case/non-genuine arm
Country of Origin ： Japan
Weight ： 3.32kg
Serial ： 6120093

Truss Rod: No problem with the neck at the limit of the rod.
Fretboard: Still can withstand cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.2mm
Neck thickness(near 1st fret)|20.3mm
Neck thickness (near 12th fret)|22.6mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: There is no problem with the neck at the limit of the rod.

Fret Remaining
There is a note that the frets are low and can still withstand cutting.

String Height (Bass String Side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
41.2mm

Neck Thickness (near 1st fret)
20.3mm

Neck Thickness (near 12th fret)
22.6mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing